FH34SRJ-34S-0.5SH(50)

Hirose FH34SRJ-34S-0.5SH(50) – Compact, Right-Angle 34‑Position FFC/FPC ZIF Connector for High‑Density Designs

The Hirose FH34SRJ-34S-0.5SH(50) is a 34-position, 0.5 mm pitch FFC/FPC ZIF receptacle engineered for space‑constrained interconnects in consumer and industrial electronics. As part of the well‑regarded FH34 series from Hirose Electric Co., Ltd., this surface‑mount, right‑angle (horizontal) connector helps designers route flat flex cables parallel to the PCB, simplifying mechanical layouts in displays, cameras, embedded modules, and other compact systems.

With zero‑insertion‑force actuation and a fine 0.5 mm pitch, the Hirose FH34SRJ-34S-0.5SH(50) enables reliable mating while minimizing stress on the cable and contacts—ideal where repeated service access or tight envelopes demand dependable, low‑profile connectivity.

Product Overview

The FH34SRJ-34S-0.5SH(50) from Hirose is a board‑mount FFC/FPC ZIF receptacle designed for horizontal (right‑angle) cable entry. It combines density (0.5 mm pitch) with straightforward SMT assembly, making it a strong fit for high‑volume products and compact embedded designs.

Key identifiers:

• Brand/Manufacturer: Hirose (Hirose Electric Co., Ltd.)
• Series: FH34
• MPN: FH34SRJ-34S-0.5SH(50)
• Category: FFC/FPC Connectors
• Interface Type: FFC/FPC ZIF receptacle

Where it fits:

• Displays and cameras
• Portable and consumer electronics
• Embedded/industrial equipment

Highlights at a Glance

• 34 positions for mid‑density interconnect needs
• 0.5 mm pitch to save board area while supporting signal routing flexibility
• ZIF receptacle to reduce insertion force and limit cable/contact wear
• Right‑angle (horizontal) orientation to enable parallel‑to‑PCB cable routing
• Surface‑mount termination (SMT) for automated assembly lines
• Neutral Gray/Black housing to blend into a wide range of product aesthetics
• Tape & Reel (TR) packaging for high‑throughput pick‑and‑place

Key Specifications

• Connector type: FFC/FPC ZIF receptacle
• Positions (contacts): 34
• Pitch: 0.5 mm
• Mounting type: Surface Mount, Right Angle (Horizontal)
• Color: Gray/Black
• Packaging: Tape & Reel (TR)
• Series: FH34

Not specified in datasheet (verify in the official FH34 documentation for this exact suffix):

• Current rating: Not specified in datasheet
• Voltage rating: Not specified in datasheet
• Contact plating/material: Not specified in datasheet
• Mating FFC thickness: Not specified in datasheet
• Operating temperature range: Not specified in datasheet
• Mechanical durability (mating cycles): Not specified in datasheet
• Actuator/lock style details: Not specified in datasheet
• Halogen‑free status: Not specified in datasheet

Why Designers Choose the Hirose FH34SRJ-34S-0.5SH(50)

• Density without complexity: The 0.5 mm pitch allows more signals in a small footprint while remaining practical for standard PCB design rules.
• ZIF reliability: Zero‑insertion‑force mechanisms minimize stress and help preserve the mechanical integrity of both the connector and the flat cable during assembly or service.
• Horizontal routing: Right‑angle entry keeps FFC/FPC cables parallel to the PCB—useful under display modules or in stacked assemblies where vertical clearance is tight.
• SMT manufacturability: Tape & Reel delivery and surface‑mount pads integrate well with modern automated assembly, inspection, and reflow processes.

Typical Applications

• Displays and cameras: Connect touch panels, LCD/TFT modules, camera modules, or backlight boards to the main system PCB.
• Portable and consumer electronics: Smartphones, tablets, handheld devices, wearables, media players, and accessories where every millimeter of height and area matters.
• Embedded/industrial equipment: Control HMI modules, sensor boards, and compact compute modules in gateways, scanners, test instruments, and automation nodes.

Across these use cases, the Hirose FH34SRJ-34S-0.5SH(50) delivers a balance of fine pitch, ZIF handling, and board‑parallel routing to keep systems slim and assembly‑friendly.

Design and Integration Considerations

• Cable selection: Ensure the FFC/FPC cable’s conductor count matches the 34‑position receptacle and that the cable termination and exposure align with the connector’s contact orientation. Mating cable thickness is Not specified in datasheet; confirm in the official FH34 documentation for the “-34S-0.5SH(50)” variant.
• Board layout: Observe keep‑out areas around the latch/actuator region so the cable can be inserted and locked without interference. Maintain adequate solder mask clearance and pad geometry per the manufacturer’s land pattern.
• Strain relief: For dynamic or field‑service environments, consider additional cable retention methods (clips, adhesive, guides) to reduce mechanical load on the connector.
• Serviceability: ZIF mechanisms ease repeated mate/demate cycles. If frequent servicing is expected, verify mechanical durability ratings (Not specified in datasheet) for your use case.
• Signal integrity: At 0.5 mm pitch, keep differential pair routing and reference planes in mind for higher‑speed signals. Cable length, impedance control, and grounding strategy can materially influence performance.

Lifecycle, Availability, and Replacements

• Lifecycle status: Not specified in datasheet. Consult Hirose’s product page for the most current status of the FH34 series and this exact part number.
• Direct drop‑in replacements: Not specified in datasheet. While the FH34 family includes multiple pin counts and variants, verify mechanical envelope, contact orientation, latch style, and plating before considering alternates.
• Sourcing note: The FH34SRJ-34S-0.5SH(50) is provided in Tape & Reel (TR), supporting automated assembly. For prototyping or small‑volume builds, check distributor availability for minimum order quantities and lead times.

Compliance and Environmental

The following items are Not specified in datasheet for the FH34SRJ-34S-0.5SH(50) and should be verified directly with the official datasheet or Hirose support:

• RoHS/REACH status: Not specified in datasheet
• Halogen‑free/flame rating: Not specified in datasheet
• Operating temperature range: Not specified in datasheet
• Moisture sensitivity level (MSL): Not specified in datasheet

If your project requires documented environmental compliance, obtain the latest compliance certificates from Hirose’s product page or through authorized distribution channels.

Ordering and Sourcing Tips

• Use the full MPN: Specify “Hirose FH34SRJ-34S-0.5SH(50)” on BOMs and POs to avoid substitutions.
• Confirm orientation: This is a right‑angle (horizontal) receptacle. Ensure your mechanical design and cable bend direction match this entry style.
• Match pitch and positions: The part is 0.5 mm pitch with 34 positions; confirm your FFC/FPC cable is the same pitch and conductor count.
• Packaging type: Tape & Reel (TR) supports automated pick‑and‑place. If you require cut tape or small quantities, confirm availability and packaging options with your distributor.
• Validate critical specs: Where values are Not specified in datasheet here (e.g., current/voltage ratings, cable thickness, temperature range), check the official FH34 series datasheet for the exact suffix to ensure compliance with system requirements.

Quick Specifications Summary

• Brand: Hirose (Hirose Electric Co., Ltd.)
• Series: FH34
• MPN: FH34SRJ-34S-0.5SH(50)
• Category: FFC/FPC Connectors
• Connector Type: FFC/FPC ZIF receptacle
• Positions: 34
• Pitch: 0.5 mm
• Mounting Angle: Horizontal (Right Angle)
• Mounting Type: Surface Mount (SMT)
• Color: Gray/Black
• Packaging: Tape & Reel (TR)

Items to confirm in the official datasheet for this exact part number:

• Electrical ratings (current/voltage): Not specified in datasheet
• Environmental ratings (temperature, flammability): Not specified in datasheet
• Contact materials/plating: Not specified in datasheet
• Mating cable thickness: Not specified in datasheet
• Durability (mating cycles): Not specified in datasheet

Applications in Detail

• Display subsystems: Use the Hirose FH34SRJ-34S-0.5SH(50) to connect display glass assemblies or driver boards to the main PCB, leveraging the right‑angle orientation to minimize stack height behind the panel.
• Camera modules: The ZIF mechanism helps protect delicate camera FFC tails during assembly, reducing risk of damage and preserving signal integrity in fine‑pitch image data lines.
• Embedded compute and sensor boards: 34 positions at 0.5 mm pitch offer enough lines for control, power, and data in compact sensor hubs, compute modules, or I/O daughtercards.
• Portable and handheld devices: Tight mechanical envelopes benefit from the horizontal entry and SMT assembly, enabling sleek industrial designs without sacrificing serviceability.

FAQs

• What is the brand and series of FH34SRJ-34S-0.5SH(50)?

• Hirose, FH34 series.

• What connector type is it?

• An FFC/FPC ZIF receptacle.

• How many positions and what pitch?

• 34 positions at 0.5 mm pitch.

• Is the connector right‑angle or vertical?

• Right‑angle (horizontal cable entry).

• What is the mounting style?

• Surface Mount (SMT).

• What packaging is available?

• Tape & Reel (TR).

• Is this part RoHS compliant?

• Not specified in datasheet. Verify on the Hirose product page for this exact part number.

• What FFC thickness does it support?

• Not specified in datasheet. Check the FH34 series datasheet for the “-34S-0.5SH(50)” configuration.

• What are the current and voltage ratings?

• Not specified in datasheet. Consult the official datasheet for exact ratings.

• Are there direct drop‑in replacements?

• Not specified in datasheet. Explore FH34 family variants only after verifying mechanical and electrical compatibility.

Resources

• Hirose FH34 Series Product Page: https://www.hirose.com/en/product/en/products/FH34/
• Hirose FH34SRJ-34S-0.5SH(50) Datasheet: https://www.hirose.com/en/product/en/products/FH34/

Summary

The Hirose FH34SRJ-34S-0.5SH(50) is a compact, horizontal FFC/FPC ZIF receptacle that balances density and manufacturability. With 34 positions at 0.5 mm pitch, SMT terminations, and Tape & Reel packaging, it integrates neatly into modern assembly flows and supports space‑critical layouts in displays, cameras, and embedded modules. Where exact electrical, environmental, or actuator details are needed, consult the official FH34 series datasheet for this specific suffix to validate fit, form, and function. By specifying the full part number—Hirose FH34SRJ-34S-0.5SH(50)—and confirming any project‑critical parameters, engineers and sourcing teams can streamline procurement and reduce design risk.